Programmable controllers PLC
Programmable logic controller that offer easy programming with Codesys and an unprecedented and unrivalled level of robustness.
Programmable controllers PLC
Advanced Controller AWC 500
- Cold start-up/Operating temperature: -40 to 70°C
- Storage temperature: -40 to 85 °
- Climate: 55 °C 97 % RH condensing
- Altitude: < 4000 m
- Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
- Shock: 50 g, 11 ms, half sine
- Bump: 25 g, 6 ms, half sine
- Direct 3-phase 690 V voltage and 1/5A current measurement, with class 0.5 Power measurement
- Fully EtherCAT-based I/O and CAN, SSI, TCP/IP, RS-422/485 communication interfaces
- Operating system software with fail-safe update
- Fault-tolerant file system
- Open software development with Linux, C/C++, CODESYS (IEC 61131-3)
PPU 300 Standard controller with CODESYS
- Diesel Generator controller
- Engine and Generator protection
- Engine CANbus
- Generator breaker control
- Shaft generator controller
- Generator control and protection
- Shore connection controller
- Shore connection breaker control
- Shore connection protection
- Bus tie breaker control
- AC protection
- PLC logic
- Rear mount
- Flexible Hardware
- Additional I/O racks (9 racks)
- Ethernet Ring connection for Power management
- Redundant breaker feedback
- Colour Display
- Marine approval
- Graphical based easy-to-use plant layout
- Synchronization
Advanced Programmable Controller AMC 300
- Fully production tested control system units
- Designed for a lifetime no less than 10 years @ 40 ºC
- Suitable for Offshore, Marine and near shore environments
- Superior robustness to vibrations, bumps and shocks
- Better ESD protection, Surge protection of I/O and Power supply
- Warranty: 2 years (not including wearable parts) with option to 3 years.
- Core specifications:
- Cold start-up/Operating temperature: -40 to 70 °C
- Storage temperature: -40 to 85 °C
- Climate: 55 °C 97 % RH condensing
- Altitude: < 4000 m
- Vibration : 2.1 g (3.2 to 50 Hz) 1.0g (13.2 to 100 Hz)
- Shock: 50 g, 11 ms, half sine
- Bump: 25 g, 6 ms, half sine
- Multifunction I/O modules with 24V DC Digital Inputs, Digital Outputs, Relay Outputs, Voltage / Current Analogue Inputs, Thermocouples, PT100/1000 inputs, Frequency Counter inputs, PWM outputs.
- Direct 3-phase 690 V voltage and 1/5A current measurement with class 0.5 Power measurement
- Modular I/O concept with distributed I/O nodes based on Standard EtherCAT and supporting EtherCAT cable redundancy
- CAN/CANopen, TCP/IP, RS-422/485 serial communication interfaces
- Operating system software with fail-safe update
- DEIF In-house maintained OS
- Real-time Patched Linux
- Discover the device via hostname (mDNS services)
- Web based configuration
- Simplified update procedures (no special tools, same for OS and firmware)
- Secured Certificated based access by standard protocols
- Customer manages all users, rights and credentials
- Network config on build-in 5 port switch (VLANs)
- Network Time protocol support as both Client and Server
- Fail-safe system software start up with two OS images (active and fault-back)
- Fault-tolerant file system
- Open software development with Linux, CODESYS V3 (IEC 61131-3)
- Regular updates to newest CODESYS V3.5 Service Packs
- Modbus TCP Client and Server library
- OPC UA Server (Open62541) library
Software - AWC 500 development package CODESYS
IEC61131-3 PLC programming (ST, FDB, SFC, IL, LD)
- CODESYS-based (compliant with other PLCs. Programmes based on CODESYS V2)
- Integrated HMI/Web visualisation
- Graphical PLC configuration
- Online debugging
- Multilanguage programming editor (unicode support) and help in Chinese, German and English
- Monitoring of all variables • Writing and forcing of receipts (sets of variables) into the PLC
- Debugging your complete project (breakpoints, stepping, single cycle, call stack))
- Interrupt-free online changes of POUs and data
- Sampling trace
- Library management for user-defined libraries
- Offline simulation • Graphic PLC configuration
- OPC Server
The development package includes:
- CODESYS V3
- AWC 500 TSP (Target Support Package)
- CODESYS Control V3 (PLC run-time update)
- AWC 500 EtherCAT device description files (.xml/.devdesc.xml)
