The iE 150 Marine is a cost-effective controller for non-oceangoing ships such as in-harbour ships, riverboats, crew boats, coasters, and pleasure craft. It provides asset control and protection plus the ability to set up power/energy management systems that optimise efficiency and save fuel.
Control and protect your onboard assets
With the iE 150 Marine, you can manage generators, energy storage systems (ESS), bus tie breakers, and shore connections using the built-in software. The device provides all the control and protection features you need, from engine protection and fuel usage monitoring to automatically using an ESS for spinning reserve to support load deviations.
Simple and effective power management
You can set up simple and effective power/energy management systems with up to 7 energy sources. This gives you stable operation and reliable power round the clock, and it optimises fuel consumption and balances the loads in the system. The iE 150 Marine supports multi-master control: If the current master controller fails, another takes over master controller duties, and all other controllers continue to operate.
Need E27 cybersecurity and more energy sources?
Check out the iE 250 Marine!
Dynamic positioning or other advanced features required?
Check out the iE 350 Marine!
Ideal for battery retrofit
The ability to control and protect an ESS makes the iE 150 Marine ideal for replacing one or more onboard generators with a battery pack. This helps you run the remaining gensets more efficiently and reduce fuel consumption and emissions. The iE 150 Marine is widely compatible with other devices and can be used in solutions with full DEIF control or mixed controller brands.
Easy to use, easy to reconfigure
Using and reconfiguring the iE 150 Marine is very easy. The illuminated buttons on the front-mounted device guide you, and you only see options that are relevant for the present function. The controller is password-protected, and you can configure the necessary permission levels. And because it comes with all necessary control software, you can quickly reconfigure it for different applications by accessing its parameters from the display or the PC tool.
For vessels with up to seven energy sources, the iE 150 Marine gives you reliable and cost-effective asset control and power management with all the features you need to ensure uninterrupted and efficient power delivery.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Advanced graphical interface AGI 400
- Wide screen format
- True glass front
- Capacitive touch screen
- Multi-touch and Gestures
- Robust aluminium housing
- SD card slot for easy storage and updating
- USB hosts for printers, accessories, data storage and updating
- Dimmable LED backlight
- Web server for remote access from i.e. mobile devices
- 3 Ethernet ports with integrated switch
- Serial communication (RS-232, RS-422 and RS-485)
- Wide range of support for industrial protocols
- OPC UA Server and Client
- JAVA scripting
- CODESYS V3 (optional)
- Powerful ARM Cortex-A9 processor
- Plug-in module for CANbus (CANopen/J1939)
- Wide operating temperature -20°C to +60°C
- Marine certifications
- Certified for hazardous environments
- Available in 7", 10", 15" and 21" sizes
Flexible display bridge indicator XDi
Illuminated display indicator features
- TFT graphical LED 3.5, 5 or 7" display
- Multiple virtual indicator layouts selectable from library
- Standard and custom scale designs
- Displays 1 or more values
- 96, 144 or 192 DIN cutouts
- XDi-Net – a short-cut to CAN bus
- Reduced wiring and installation
- Instant repairs on board
- MED and other relevant class approvals
Flexible display indicator for navigation applications Navigation Indicator (XDi-N)
- TFT graphical LED 3.5, 5 or 7" display
- Two CAN ports with CANopen and XDi-net
- Redundant power inputs
- XDi-Net – add multiple XDi indicators
- Up to six NMEA inputs & up to four outputs
- NMEA data offset and averaging functions
- Dimmer controllable using front/external pushbuttons, analogue, NMEA or CAN/XDi-net.
- 3 level priority data fall-back function
- True wind data calculation
- Calculate magnetic or true heading
- XDi-net group dimmer and day/night colour shift
- Toggle between up to four predefined indicator screens using the mode function
- Quick-switch between measuring units either locally or for the entire system
- Customised indicator designs available on request
- Standard day and night designs, dusk on request
- Optional analogue or digital inputs
- Optional warning and alarms/relay output
- MED and other relevant class approvals
Flexible display indicator for wind and weather applications Wind Indicator (XDi-N)
- TFT graphical LED 3.5, 5 or 7" display
- 96, 144 or 192 DIN cutouts
- Two CAN ports for easy interfacing
- XDi-Net – add multiple XDi indicators
- Redundant power inputs
- Compatible with wind sensors providing NMEA data (such as DEIF’s ultrasonic wind sensors)
- Up to six NMEA compatible inputs
- Up to four NMEA outputs
- Relative, true & geographic wind indication
- Toggle between up to four predefined indicator screens
- Quick-switch between wind speed measuring units (knots, m/s or m/h, km/h, beaufort)
- Dimmer controllable using front/external push-buttons, analogue, NMEA or CAN/XDi-net
- Standard day and night designs
- Customised indicator designs available on request
- Optional analogue or digital input
- Optional wind warning and alarms/relay output
- Optional IP66 protection
Revolution Counter Revolution Counter (XDi-D)
- Calculate absolute RPM and % RPM in single or bi-directional systems.
- Direct connection to an inductive pickup or similar pickup providing a digital on/off or open/closed signal.
- Quick setup and configuration via XDi menu
- Add multiple Revolution Counter repeaters via XDi-Net
- Revolution counter start value adjustable in case of retrofit installation
- TFT graphical LED 3.5, 5 or 7" display
- 96, 144 or 192 DIN cutouts
- Two CAN ports for easy interfacing
- Redundant power inputs
- Dimmer controllable using front/external push-buttons, analogue, NMEA or CAN/XDi-net
- Customized indicator designs available on request
- Optional IP66 protection
- Accumulates revolutions over time (up to 99 999 999 rev. after that is starts from 0 again)
