The MVR-M210 is a compact motor protection and control solution which can be extended by 4 available extension slots. The device can connect up to 12 RTD sensors for thermal alarms and tripping.
5 x Current input (configurable 0.2…10A)
3 x Digital input
5 x Output relay (4NO, 1CO)
1 x IRF output (1CO)
2 x Remote com port (1 x RJ45 Ethernet and 1 x RS-485)
- IEC 61850 Ed1, Modbus TCP/RTU, IEC 60870-5-104/103/101, DNP 3.0, SPA protocols
- DT, IEC or ANSI time/overcurrent curves with settable release delays
- 4 extension slots for additional hardware options
- Event recorder (up to 15 000 events)
- Disturbance recorder (up to 100 disturbance records)
- supports 5 thermal models (time constant accurate)
- soft-start protection starts at 6Hz
- Wye-delta started motor supervision
- two-speed motor protection
Available Extension Cards:
- 8x digital inputs (programmable threshold voltage)
- 5x output relays
- Arc-Flash Protection - 4x sensor channels, 2x HSO1, 1x BI *)
- 8x RTD input
- 2x RJ45 100Mb Ethernet & IRIG-B *)
- 2x ST 100Mb Ethernet & IRIG-B *)
- 4x mA outputs - 1 x mA input
- 2x LC 100MB Ethernet (HSR, PRP redundant protocols)
- 2x RJ45 100MB Ethernet (HSR, PRP redundant protocols) *)
- RS-232 - Serial Fiber
*) Land based applications only. Not marine approved
Marine approvals
- DNV/GL
- Lloyds Registeres LR
- Bureau Vertias BR
- ABS (USA)
- CCS (China)
- CNK (Japan)
- IEC (Israel)
- KR (Korea)
- UKCA (UK)
- RINA (Italy)
Read more
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Protection & power management PPM 300 PPM 300
- Synchronization
- Marine certified Power Management - ABP: Advanced blackout prevention (32dg)
- PLC logic
- Engine and Generator protection
- Engine CANbus
- Rear mount
- Flexible Hardware
- Additional I/O racks (9 racks)
- Ethernet Ring connection for Power management
- Redundant breaker feedback
- Colour Display
- Emulation
- Marine approval
- Heavy consumer
- Fast load reduction
- Fuel optimisation
Multi-differential relay MDR-2
- Short response time (70 ms)
- 3-phase current detection on both generator sides
- Active adjustment of non-balanced current measurements
- Measuring accuracy 1 %
- Display indicator for all measurements
- DIN rail or base mounting with remote mountable display
Multi-functional protection relay MTR-4P
- Up to 1,000 V L-L AC voltage input
- Up to 20 A AC current input
- Accuracy class: 0.5
- Password protection
- Trip time typically below 50 ms
- Two-stage trip setting
- Start-up delay
- 13 different protection functions
- RS-485 serial Modbus communication
- Fast and simple commissioning and setup from M-set
- Universal power supply of 20 to 300 V DC/48 to 276 V AC
- Marine approval by GL/DNV
Automatic genset controller AGC-4 Mk II
- Automatic Mains Failure sequence
- Multi-master Power Management
- Power Management Core (32dg)
- Power Management Extended (>32dg)
- RMB Transformer maintenance with up to 32 gensets
- PLC logic
- Engine CANbus
- Din rail mount
- Flexible Hardware
- Additional CANbus based I/O (9 x CIO modules)
- Redundant controller
- Redundant CANbus for Power mamangement
- N+X configuration
- Close Before Excitation / Run-up synchronization from 6 seconds
- DEIF digital AVR DVC550 support
- Multi purpose PID´s
- Gridcode compliant with: VDE AR-N 4110/4105 (Medium voltage, Germany, VDE AR-N 4105 (low voltage, Germany, EN 50549-1:2019 (Europe), ENA EREC G99 (United Kingdom)
- Touch Screen Support (TDU107)
- Tier4 final/stage5
- Emulation for easy training and FAT
- Hybrid EMS support (via ASC-4)
- Heavy consumer (via ALC-4)
- Fuel optimisation
- Fully compatible with AGC 150 and ASC-4
- TÜV pending and UL approved